The Silkland DP80 DisplayPort Cable review is for gamers connecting a nearby PC and monitor who want a short, high-bandwidth DisplayPort link.
Its 80Gbps DP 2.1 design and VESA certification are aimed at demanding resolutions and refresh rates, provided both ends of the setup can support them.
Silkland DP80 Cable Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A 1.6-foot cable for desktop gamers pairing DisplayPort 2.1 equipment who want high bandwidth without excess cable slack.
- DisplayPort 2.1 DP80 cable with VESA certification and a stated data rate of 80Gbps.
- Listed uncompressed modes include 4K at 240Hz, 8K at 60Hz and 2K at 540Hz; DSC-enabled modes go up to 16K at 60Hz, 8K at 240Hz and 4K at 540Hz.
- Supports UHBR20, Dynamic HDR10+, HDCP 2.3, 3D, VRR, FEC, ALLM, DSC 1.2a and MST.
- Backward compatible with DisplayPort 2.0 and 1.4, with uncompressed 7.1, 5.1 and 2.0 audio pass-through.
Pros
- High bandwidth and a wide range of listed resolution and refresh combinations for compatible equipment.
- Gaming features include VRR, ALLM, FEC, DSC 1.2a, G-Sync and FreeSync support.
Consider before buying
- The 1.6-foot reach may be too short for many desk layouts; account for the full cable route, not just the gap between devices.
- The highest listed resolutions and refresh rates depend on the graphics card, monitor and settings working together; confirm both devices’ supported modes.
Read the full review summary
The DP80’s strongest case is its stated bandwidth and broad display-mode support in a compact 1.6-foot cable.
It supports uncompressed 4K at 240Hz, 8K at 60Hz and 2K at 540Hz; with DSC enabled, its listed modes reach up to 16K at 60Hz, 8K at 240Hz and 4K at 540Hz.
Those figures describe possible configurations, not a guarantee that every PC and monitor combination can produce them.
This is a sensible fit for a close-range gaming setup built around DP ports, especially if the graphics card and monitor both support DP 2.1 UHBR20.
The no-latch plug, braided nylon exterior and triple shielding suit a cable that may be moved or routed in a busy desk area.
Its short length is the main constraint: measure the actual path between ports before choosing it.
The buying factors
Silkland DP80 Cable Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Bandwidth headroom
The 80Gbps DP 2.1 specification and high listed resolution and refresh combinations give compatible equipment substantial headroom.
High-refresh gaming fit
VRR, ALLM, FEC and DSC 1.2a are included among the gaming-oriented features, alongside G-Sync and FreeSync compatibility.
Connection flexibility
At 1.6 feet, it keeps a nearby connection compact but offers little routing slack if ports are not close together.
Build and handling
A nylon exterior, 28AWG tinned copper conductors and triple shielding point to a sturdy, interference-conscious construction.
Setup convenience
The latch-free, plug-and-play design avoids a release tab, which can make removal simpler in a tight space.
Compatibility clarity
It works with DP-equipped devices and older DisplayPort versions, though reaching the highest modes depends on the capabilities of both connected devices.
Key Features and Specifications of Silkland DP80 Cable
- DisplayPort 2.1 DP80 cable with VESA certification and a stated data rate of 80Gbps.
- Listed uncompressed modes include 4K at 240Hz, 8K at 60Hz and 2K at 540Hz; DSC-enabled modes go up to 16K at 60Hz, 8K at 240Hz and 4K at 540Hz.
- Supports UHBR20, Dynamic HDR10+, HDCP 2.3, 3D, VRR, FEC, ALLM, DSC 1.2a and MST.
- Backward compatible with DisplayPort 2.0 and 1.4, with uncompressed 7.1, 5.1 and 2.0 audio pass-through.
- Male-to-male DisplayPort connectors have no latch; the cable uses 28AWG tinned copper conductors, triple shielding and a nylon exterior.
- The 1.6-foot cable is intended for indoor use and connects DP-equipped computers or graphics cards to monitors.
Pros and Cons of Silkland DP80 Cable
Pros
- High bandwidth and a wide range of listed resolution and refresh combinations for compatible equipment.
- Gaming features include VRR, ALLM, FEC, DSC 1.2a, G-Sync and FreeSync support.
- Short length can help keep a nearby desktop connection tidy.
- Latch-free connectors and a braided nylon exterior support straightforward handling and routing.
Consider before buying
- The 1.6-foot reach may be too short for many desk layouts; account for the full cable route, not just the gap between devices.
- The highest listed resolutions and refresh rates depend on the graphics card, monitor and settings working together; confirm both devices’ supported modes.
- MST is listed for multi-monitor setups, but buyers should check that their equipment and intended display arrangement support the configuration they want.
Who Should Buy Silkland DP80 Cable?
Good fit
Consider the Silkland DP80 Cable if your PC and monitor sit close together and both have DisplayPort connections.
It makes the most sense when you are building around DP 2.1 equipment and want bandwidth headroom for high-refresh gaming, with features such as VRR, ALLM and DSC in the same cable.
Before buying, check the exact output modes supported by both the graphics card and monitor. The cable’s maximums are useful only when the connected hardware, resolution, refresh rate and DSC configuration line up.
Also measure the routed distance, allowing enough slack to connect and disconnect without pulling on the ports.
For a compact setup where cable slack would get in the way, the short format can be an advantage.
Its braided exterior and latch-free plugs also make sense if you regularly rearrange equipment or need to remove the cable from a crowded port area.
Who should skip it
Skip this length if the PC and monitor are separated by a long route, or if the cable must pass around furniture or through a cable-management channel.
Measure first and choose a longer option if the path leaves little slack.
Look elsewhere if your setup relies on HDMI at either end, or if you need a cable specifically for devices without DisplayPort ports. This is a male-to-male DisplayPort cable.
How the Silkland DP80 Cable Fits a Gaming Setup
Bandwidth is only useful when the whole setup supports it
The DP80’s 80Gbps rating and listed high-refresh modes make it a forward-looking choice for compatible equipment. The product specifically points buyers toward a graphics card and monitor that both support DisplayPort 2.1 UHBR20.
Check the display’s resolution and refresh combinations, as well as whether a mode uses DSC, before expecting to use a particular maximum.
A short cable rewards careful measurement
The 1.6-foot length is suited to a direct connection between nearby ports.
That can reduce extra cable around a desktop, but the usable path is longer than the straight-line distance if it needs to bend around a stand or follow a routing channel.
Measure from connector to connector along the route and leave working slack.
Gaming and multi-display features need compatible devices
VRR, FEC, ALLM and DSC 1.2a target smoother high-refresh use, while MST can support multi-monitor arrangements. These features do not determine the capabilities of the connected PC or displays.
If you plan a multi-monitor configuration, confirm the graphics card and monitor ports support the intended arrangement and use matching cable types as the product recommends.
Construction and connector style favor easy handling
The cable combines a nylon exterior with 28AWG tinned copper conductors and triple shielding. Gold-plated connectors are included, and the plugs omit a latch in favor of a simpler pull-out connection.
That design may be convenient in a tight port cluster, while the braided jacket may feel less flexible than a basic smooth cable during routing.
Alternatives to Silkland DP80 Cable
Computer DisplayPort Cables alternative

7,000+ ratings
Read Amazon ReviewsSilkland 54Gbps DisplayPort 2.1 Cable, 10 ft
Choose the DP80 when the short reach works and you want its higher stated bandwidth and listed refresh headroom.
The 10-foot cable is a more practical fit when your components are farther apart or need a longer routing path, and its listed modes may be enough for setups that do not need the DP80’s higher maximums.
- This Silkland cable is 10 feet long and lists 54Gbps bandwidth, VESA certification, DSC 1.2a, 16K at 60Hz with DSC, 8K at 120Hz and 4K at 240Hz.
- Its description also specifies a double nylon braid and backward compatibility with a broader range of older DisplayPort versions.
- The DP80 is a 1.6-foot cable with 80Gbps bandwidth, DP 2.1 and VESA certification, intended for close-range connections.
Is Silkland DP80 Cable Worth It?
The Silkland DP80 DisplayPort Cable is worth considering for a nearby gaming monitor when both ends support DisplayPort and you want an 80Gbps DP 2.1 connection with high-refresh headroom.
Its gaming features and braided construction make it a well-targeted option for that kind of setup.
Measure the routed distance and confirm the GPU and monitor support the modes you plan to use.
If the 1.6-foot reach fits and the hardware is compatible, the DP80 is a focused choice; if not, its length or unused bandwidth may make a longer, lower-bandwidth cable a better match.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A 1.6-foot cable for desktop gamers pairing DisplayPort 2.1 equipment who want high bandwidth without excess cable slack.
- DisplayPort 2.1 DP80 cable with VESA certification and a stated data rate of 80Gbps.
- Listed uncompressed modes include 4K at 240Hz, 8K at 60Hz and 2K at 540Hz; DSC-enabled modes go up to 16K at 60Hz, 8K at 240Hz and 4K at 540Hz.
- Supports UHBR20, Dynamic HDR10+, HDCP 2.3, 3D, VRR, FEC, ALLM, DSC 1.2a and MST.
- Backward compatible with DisplayPort 2.0 and 1.4, with uncompressed 7.1, 5.1 and 2.0 audio pass-through.