The SmallRig Field Monitor Mount Holder review centers on a compact mount for filmmakers who need to position a 5- or 7-inch monitor above a camera cage or handle.
Its cold-shoe base, broad angle adjustment, and thumb-operated tilt control suit a rig where quick repositioning matters.
SmallRig Monitor Mount Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig Field Monitor Mount Holder
A compact monitor mount for camera-rig users who want flexible viewing angles, cold-shoe attachment, and a padded anti-twist connection.
- Designed to support 5- and 7-inch camera monitors through a cold-shoe connection on top of a camera cage or handle.
- Provides up to 180 degrees of tilt and 360 degrees of swivel for changing monitor position.
- Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the supplied Allen wrench.
- Locating pins and a silicone pad are built into the top to help secure compatible monitors and reduce surface scratching or twisting.
Pros
- Broad tilt and swivel adjustment makes it easier to reposition a monitor for different shooting angles.
- Thumb-operated tilt tension adjustment is convenient for routine framing changes.
Consider before buying
- Swivel tension adjustment requires the supplied Allen wrench rather than a hand-adjusted control.
- Load capacity decreases at lower tilt angles, so buyers should check the limit for their intended position.
Read the full review summary
This mount combines a cold-shoe adapter with a top 1/4-inch screw, so it can sit on a compatible cage or handle while supporting a monitor or another small accessory.
The top includes locating pins and a silicone pad intended to help resist twisting and scratching, useful details when attaching a compatible monitor such as the Ninja V or V+.
Its 180-degree tilt and 360-degree swivel allow substantial repositioning, and tilt tension can be adjusted with a thumbscrew. The swivel tension still requires the supplied Allen wrench, and the stated load capacity changes with tilt angle.
It is best suited to compact camera setups where a short, direct mount is preferable to a longer articulated arm.
The buying factors
SmallRig Monitor Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Angle adjustment
The mount supports 180-degree tilt and 360-degree swivel, giving a broad range of screen positioning.
Tilt adjustment access
Tilt tension adjusts quickly by hand, though adjusting swivel tension requires the supplied Allen wrench.
Attachment flexibility
The cold-shoe base, top 1/4-inch screw, and bottom 1/4-inch threaded hole support several mounting arrangements.
Monitor retention details
Locating pins and a silicone pad are designed to help secure compatible monitors and protect their surfaces.
Load guidance
Angle-specific limits are provided, but buyers need to match their monitor and chosen tilt to those limits.
Compactness
At 76 g and a folded size of 78 × 67 × 42 mm, it is a small addition to a camera rig.
Key Features and Specifications of SmallRig Monitor Mount
- Designed to support 5- and 7-inch camera monitors through a cold-shoe connection on top of a camera cage or handle.
- Provides up to 180 degrees of tilt and 360 degrees of swivel for changing monitor position.
- Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the supplied Allen wrench.
- Locating pins and a silicone pad are built into the top to help secure compatible monitors and reduce surface scratching or twisting.
- The bottom cold-shoe adapter connects to a compatible shoe mount, while a bottom 1/4-inch threaded hole supports a magic arm or stabilizer connection.
- The top 1/4-inch screw can support a monitor, microphone, light, or other compatible accessory.
- The stated load capacity varies by tilt: under 9.3 lb at 90 degrees, under 5.5 lb at 45 degrees, and under 5 lb at 30 degrees. The 1/4-inch knurled screw should be retightened with the Allen wrench.
Pros and Cons of SmallRig Monitor Mount
Pros
- Broad tilt and swivel adjustment makes it easier to reposition a monitor for different shooting angles.
- Thumb-operated tilt tension adjustment is convenient for routine framing changes.
- Locating pins and a silicone pad provide useful contact and retention features for compatible monitors.
- Small size and 76 g weight keep the mount's contribution to a camera rig modest.
Consider before buying
- Swivel tension adjustment requires the supplied Allen wrench rather than a hand-adjusted control.
- Load capacity decreases at lower tilt angles, so buyers should check the limit for their intended position.
- Its short direct-mount format may not provide the reach or placement flexibility some setups need from an articulated arm.
Who Should Buy SmallRig Monitor Mount?
Good fit
Consider it if you use a 5- or 7-inch field monitor and want a direct cold-shoe mount with substantial tilt and swivel range.
The locating pins and silicone pad are useful design details for a compatible monitor, while the compact body should suit cages and handles where space is limited.
Before choosing it, check that your cage or handle has a compatible cold shoe, and confirm the monitor's weight against the capacity for your planned tilt angle.
If you expect frequent swivel-tension changes, factor in that the adjustment uses the included Allen wrench.
Who should skip it
Look elsewhere if your rig needs a long reach between the camera and monitor; this compact holder is designed for direct mounting rather than an extended arm.
It is also a poor fit if your equipment exceeds the stated capacity at the angle you need, or if you require every adjustment to be tool-free.
SmallRig Monitor Mount: How the Design Fits a Camera Rig
A direct connection for compact rigs
The cold-shoe base is intended for placement on a camera cage or handle, keeping the monitor close to the camera.
A bottom 1/4-inch threaded hole adds another mounting route for a compatible magic arm or stabilizer, so buyers can choose between a shoe connection and a threaded setup where their rig supports it.
Angle range and tension controls
The 180-degree tilt and 360-degree swivel give the screen room to move for different camera positions.
Tilt tension is adjusted at the thumbscrew, while swivel tension uses the supplied Allen wrench; buyers who regularly change both settings should consider whether carrying and using that tool fits their workflow.
Match the tilt to the monitor's weight
The capacity figures vary with the mount's angle, with the greatest listed allowance at 90 degrees and lower limits at 45 and 30 degrees.
Check the weight of the full device being mounted and use the limit for the angle you plan to hold. The instructions also call for retightening the 1/4-inch knurled screw with the Allen wrench.
Contact points for a compatible monitor
Locating pins and a silicone pad are intended to help resist twisting and protect the monitor surface.
These details may be especially relevant when checking fit with a compatible monitor; confirm that the pins and screw arrangement align with your device before building the rest of the rig around it.
Alternatives to SmallRig Monitor Mount
One supplied alternative closely matches the monitor-mount use case; other candidates focus on clamps, articulated arms, or camera cages rather than the same direct mounting role.
Camera Mounts & Clamps alternative

800+ ratings
Read Amazon ReviewsSmallRig Camera Monitor Mount 6313
Consider the 6313 if portrait or landscape monitor orientation and a retractable locating screw matter to your rig.
The Field Monitor Mount Holder is a more compactly specified option with listed load limits for several tilt angles; compare both mounting interfaces with your monitor and cage before choosing.
- The 6313 also offers 180-degree tilt and 360-degree pan, with a cold-shoe base and bottom 1/4-inch threaded hole.
- Its description adds a retractable locating screw, support for horizontal or vertical monitor installation, and tilt damping adjusted by thumb knob.
- The Field Monitor Mount Holder has a cold-shoe base, a top 1/4-inch screw, locating pins, a silicone pad, and angle-dependent load limits.
Is SmallRig Monitor Mount Worth It?
The SmallRig Field Monitor Mount Holder is worth considering for a compact camera rig that needs a directly mounted 5- or 7-inch monitor with wide angle adjustment.
Its hand-adjusted tilt tension, locating pins, and silicone pad make the design practical for routine framing.
Check the angle-specific load limit against your monitor and setup, and plan for the Allen wrench when changing swivel tension or retightening the knurled screw.
If those requirements fit, it offers a focused way to position a monitor without adding a long arm.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig Field Monitor Mount Holder
A compact monitor mount for camera-rig users who want flexible viewing angles, cold-shoe attachment, and a padded anti-twist connection.
- Designed to support 5- and 7-inch camera monitors through a cold-shoe connection on top of a camera cage or handle.
- Provides up to 180 degrees of tilt and 360 degrees of swivel for changing monitor position.
- Tilt tension adjusts with a thumbscrew; swivel tension adjusts with the supplied Allen wrench.
- Locating pins and a silicone pad are built into the top to help secure compatible monitors and reduce surface scratching or twisting.