Product Reviews

SmallRig Super Clamp Review: A Compact Mounting Option for Cameras and Accessories

A versatile clamp for camera owners who need to attach compatible accessories to narrow bars, shelves, or other surfaces.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig Super Clamp is a compact way to attach a camera or compatible accessories to a range of firm mounting points.

This SmallRig Super Clamp review looks at its adjustable jaw, threaded holes, and the practical limits to check before choosing it.

SmallRig Super Clamp Review Summary

The quick verdict

SmallRig Super Clamp
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig Super Clamp

A versatile clamp for camera owners who need to attach compatible accessories to narrow bars, shelves, or other surfaces.

  • Adjustable jaw opens to about 40mm and closes to a minimum of 15mm.
  • Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible accessories.
  • Designed to attach to mounting points such as hooks, shelves, plate glass, crossbars, and other clamps.
  • Rubber pads on the clamp parts are intended to help prevent slipping and scratching.

Pros

  • A useful jaw range for surfaces that measure between 15mm and about 40mm thick.
  • Two common thread sizes provide options for attaching compatible camera accessories.

Consider before buying

  • The jaw range rules out surfaces that are thinner than 15mm or thicker than about 40mm.
  • The package contains the clamp only, so buyers who need an articulating arm or ballhead must source that separately.
Read the full review summary

This clamp pairs an adjustable jaw with 1/4-inch and 3/8-inch threaded holes, giving a small camera setup several ways to connect accessories.

Its rubber pads are intended to help resist slipping and protect the clamped surface from scratches, while the aluminum alloy and stainless steel construction keeps the design focused on a durable, reusable mount.

It is best suited to buyers who already know where they want to attach it and can confirm that surface is between 15mm and about 40mm thick.

The clamp is supplied on its own, so consider what fittings your camera or accessory requires and whether you need an additional ballhead or arm to position it.

The buying factors

SmallRig Super Clamp Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Mounting versatility

The jaw can attach to several kinds of surfaces, and the two thread sizes give compatible accessories mounting options.

7/10

Jaw range

The 15mm minimum and approximately 40mm maximum opening define a useful range, though the surface must fit within it.

8/10

Accessory compatibility

Both 1/4-inch and 3/8-inch threaded holes support a range of camera rig accessories.

7/10

Surface protection

Rubber pads are designed to help reduce slipping and scratching at the clamp contact points.

8/10

Build materials

Aluminum alloy and stainless steel are used in the clamp's construction.

6/10

Setup flexibility

The clamp offers mounting points, but the package includes no arm or ballhead for repositioning attached gear.

Key Features and Specifications of SmallRig Super Clamp

  • Adjustable jaw opens to about 40mm and closes to a minimum of 15mm.
  • Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible accessories.
  • Designed to attach to mounting points such as hooks, shelves, plate glass, crossbars, and other clamps.
  • Rubber pads on the clamp parts are intended to help prevent slipping and scratching.
  • Constructed from aluminum alloy and stainless steel.
  • The package includes one super clamp.

Pros and Cons of SmallRig Super Clamp

Pros

  • A useful jaw range for surfaces that measure between 15mm and about 40mm thick.
  • Two common thread sizes provide options for attaching compatible camera accessories.
  • Rubber contact pads can help protect the clamped surface and improve grip.
  • Metal construction suits a reusable camera rig accessory.

Consider before buying

  • The jaw range rules out surfaces that are thinner than 15mm or thicker than about 40mm.
  • The package contains the clamp only, so buyers who need an articulating arm or ballhead must source that separately.
  • The supplied description gives a maximum weight recommendation of 3.3 pounds; check the full mounted setup and accessory requirements before use.

Who Should Buy SmallRig Super Clamp?

Good fit

Consider this clamp if your setup needs a compact attachment point on a bar, shelf, or other suitable surface and the jaw opening matches its thickness.

The 1/4-inch and 3/8-inch threads make it adaptable to compatible camera accessories, and the padded contact points are a practical feature when clamping surfaces you want to avoid scratching.

Before buying, measure the intended mounting surface and confirm the connection standard required by your accessory.

If the accessory needs to sit at a particular angle or farther from the clamp, plan for a compatible ballhead or arm as a separate part of the setup.

Who should skip it

Skip this design if your mounting surface falls outside the 15mm to approximately 40mm jaw range, or if you need a complete clamp-and-arm kit in one package.

For a heavier setup, compare its total mounted load with the stated 3.3-pound maximum recommendation and confirm every component in the rig is suitable for that arrangement.

How the SmallRig Super Clamp Fits a Camera Rig

Check the surface before planning the rig

The jaw range is the first practical constraint: it opens to about 40mm and closes to 15mm. Measure the intended bar, shelf edge, or other mounting point before building the rest of the setup around this clamp.

Thread sizes shape accessory choices

The 1/4-inch and 3/8-inch threaded holes give the clamp options for connecting compatible accessories. Check the fitting on the camera, light, or other gear you intend to mount; if its connection differs, you may need a suitable adapter.

Grip and contact surfaces matter

Rubber pads are placed on the clamp parts to help resist slipping and scratching.

Their presence may be useful when the mounting surface needs protection, but the right fit still depends on choosing a surface the jaw can close around properly.

Plan for positioning separately

This package contains one clamp, rather than an articulated arm or ballhead. The threaded holes allow compatible additions, but buyers who need a specific camera angle should account for the extra positioning hardware when planning the rig.

Alternatives to SmallRig Super Clamp

Camera Mounts & Clamps alternative

SmallRig 9.8-Inch Magic Arm Clamp Kit
4.6/5

3,000+ ratings

Read Amazon Reviews

SmallRig 9.8-Inch Magic Arm Clamp Kit

Choose the main clamp if a standalone mount and its approximately 40mm jaw opening suit your setup.

Choose this kit if you want an included articulating arm and need its wider maximum jaw opening, while checking that the added length and connection arrangement suit your rig.

  • This kit combines a super clamp with a 9.8-inch articulating arm and double 360-degree ball heads.
  • Its clamp opens to a maximum of 54mm and minimum of 15mm, and both pieces have rubber cushions.
  • The SmallRig Super Clamp is a standalone clamp with 1/4-inch and 3/8-inch threaded holes; an arm or ballhead is not included.

Camera Mounts & Clamps alternative

SmallRig Double Ball Head Super Clamp Mount
4.6/5

8,000+ ratings

Read Amazon Reviews

SmallRig Double Ball Head Super Clamp Mount

Choose the main clamp if you want the simpler standalone clamp and its 1/4-inch and 3/8-inch threaded holes.

Consider the double ballhead mount if you need an included articulated connection or action camera adapter; compare its mounting arrangement and stated support limit with your equipment.

  • This clamp mount includes a dual ballhead arrangement, a 1/4-inch screw, and an action camera mount adapter.
  • It is intended for mounting gear to rods, tubes, tables, or frames, with a stated maximum support recommendation of 1.5kg.
  • The SmallRig Super Clamp has threaded holes for adding compatible accessories, but it does not include a ballhead or action camera adapter.

Is SmallRig Super Clamp Worth It?

The SmallRig Super Clamp is worth considering for a camera setup that needs a compact, padded clamp with two common threaded connection sizes.

Its adjustable jaw and metal construction make it a flexible mounting component when the surface fits its range.

Measure the mounting point and confirm your accessory's thread before deciding.

Buyers who need an arm or ballhead should factor that extra hardware into the setup, while those with surfaces outside the jaw range should choose a different mounting design.

Your review at a glance

SmallRig Super Clamp
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig Super Clamp

A versatile clamp for camera owners who need to attach compatible accessories to narrow bars, shelves, or other surfaces.

  • Adjustable jaw opens to about 40mm and closes to a minimum of 15mm.
  • Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible accessories.
  • Designed to attach to mounting points such as hooks, shelves, plate glass, crossbars, and other clamps.
  • Rubber pads on the clamp parts are intended to help prevent slipping and scratching.

Written by

yorkscene.com Editorial Team

Editorial team

yorkscene.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig Super Clamp

SmallRig Super Clamp

A versatile clamp for camera owners who need to attach compatible accessories to narrow bars, shelves, or other surfaces.

  • Adjustable jaw opens to about 40mm and closes to a minimum of 15mm.
  • Includes 1/4-inch threaded holes and a 3/8-inch threaded hole for compatible accessories.
Check Video Reviews on Amazon