Product Reviews

SMALLRIG 4382 Universal Phone Holder Mount Review

A flexible camera or tripod phone clamp for creators who want quick portrait and landscape framing with room for a light or microphone.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SMALLRIG Universal Phone Holder Mount review is for creators who want a phone clamp that can move between camera and tripod setups while allowing portrait and landscape framing.

Its rotating joints and accessory mounts offer practical flexibility, provided your phone fits the clamp’s width range.

SMALLRIG Phone Holder Review Summary

The quick verdict

SMALLRIG 4382 Universal Phone Holder Mount
4.6/5

2,000+ ratings

Read Amazon Reviews

SMALLRIG 4382 Universal Phone Holder Mount

A flexible camera or tripod phone clamp for creators who want quick portrait and landscape framing with room for a light or microphone.

  • Fits smartphones measuring 57–88 mm wide.
  • Switches between landscape and portrait orientation, with a secure lock at 90 degrees.
  • Two rotary joints provide up to 180 degrees of adjustment.
  • Attaches through a bottom 1/4"-20 threaded hole or cold shoe.

Pros

  • Supports both portrait and landscape framing with a locking rotation point.
  • Two rotary joints add flexibility for positioning the phone.

Consider before buying

  • Phone fit depends on width; check that your phone, including any case, stays within 57–88 mm.
  • The 500 g maximum load capacity calls for attention to the combined phone and accessory setup.
Read the full review summary

The SMALLRIG 4382 combines a phone clamp with a cold shoe and several threaded mounting points.

A 1/4"-20 threaded hole and a cold shoe at the bottom provide two ways to attach it to compatible camera or tripod setups, while the top cold shoe can hold an accessory such as a microphone or light.

Its 57–88 mm phone-width range covers many smartphones, and the holder can switch between landscape and portrait orientation with a lock at 90 degrees.

It suits vloggers, interview setups, livestreams, and mobile photography workflows that benefit from adjusting phone angle or attaching accessories. The package includes the holder only, so buyers should plan around their existing support gear.

The buying factors

SMALLRIG Phone Holder Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Phone fit range

The 57–88 mm width range suits many phones, but buyers should check their device’s width.

8/10

Orientation flexibility

It supports landscape and portrait use and locks when rotated 90 degrees.

8/10

Angle adjustment

Two rotary joints allow up to 180 degrees of adjustment.

8/10

Mounting options

A bottom 1/4"-20 threaded hole and cold shoe give compatible camera and tripod rigs mounting choices.

7/10

Accessory expansion

The top cold shoe supports a microphone or light, and spaced threaded holes are intended for power bank holders.

6/10

Payload suitability

The stated maximum load capacity is 500 g, so the combined setup should stay within that limit.

Key Features and Specifications of SMALLRIG Phone Holder

  • Fits smartphones measuring 57–88 mm wide.
  • Switches between landscape and portrait orientation, with a secure lock at 90 degrees.
  • Two rotary joints provide up to 180 degrees of adjustment.
  • Attaches through a bottom 1/4"-20 threaded hole or cold shoe.
  • Top cold shoe accepts an accessory such as a microphone or light.
  • Spaced threaded holes support installation of compatible power bank holders; maximum load capacity is 500 g.
  • The package contains one phone holder. The listed dimensions are 4.06 × 1.63 × 1.23 inches, and listed weight is 73 g.

Pros and Cons of SMALLRIG Phone Holder

Pros

  • Supports both portrait and landscape framing with a locking rotation point.
  • Two rotary joints add flexibility for positioning the phone.
  • Offers both threaded and cold shoe mounting at the base.
  • Top cold shoe and spaced threaded holes support a more equipped mobile rig.

Consider before buying

  • Phone fit depends on width; check that your phone, including any case, stays within 57–88 mm.
  • The 500 g maximum load capacity calls for attention to the combined phone and accessory setup.
  • Only the phone holder is included, so a camera, tripod, microphone, light, and other rig components must be supplied separately.

Who Should Buy SMALLRIG Phone Holder?

Good fit

Consider the 4382 if you want one clamp for phone-based filming or photography across compatible camera and tripod setups.

The choice of bottom threaded or cold shoe attachment can help it fit into rigs built around either connection, and the upper cold shoe gives you a place to add a light or microphone.

The adjustable joints and 90-degree locking rotation are useful when a shoot calls for changing the phone’s orientation or framing angle.

Before choosing it, measure the phone with its case fitted and account for the weight of the phone and anything mounted to the holder against the 500 g limit.

Who should skip it

Look elsewhere if your workflow requires a phone wider than 88 mm or narrower than 57 mm, or if the phone and mounted accessories together exceed the stated 500 g capacity.

It may not be the right fit if you need a complete filming kit in one package: this product includes the holder, while compatible support gear and accessories are separate.

How the SMALLRIG Phone Holder fits a mobile filming rig

A clamp built around phone dimensions

The 57–88 mm width range gives a clear fit check before purchase. Measure the phone with its case in place, since the case contributes to the width that the clamp must accommodate.

The listed compatible models are examples within a broad range; dimensions are the practical check for a particular device.

Orientation and angle changes

Portrait and landscape switching, a lock at 90 degrees, and two rotary joints address different framing needs. Rotation helps change the phone’s orientation, while the joints provide up to 180 degrees of adjustment for positioning.

These features are useful when framing needs change during a session, though the right result still depends on where the holder is attached.

Planning connections and accessories

The base offers a 1/4"-20 threaded hole or cold shoe, while a second cold shoe sits on top.

That arrangement supports adding the mount to a compatible camera or tripod setup and placing a microphone or light above the phone.

The spaced threaded holes are intended for compatible power bank holders, so check the mounting requirements of any accessory you plan to use.

Keep the overall load in view

The maximum load capacity is 500 g, making the weight of the whole mounted setup a relevant buying consideration. Include the phone and any added accessories when assessing the load.

The compact listed dimensions and 73 g weight make the holder itself a modest part of a rig’s bulk, but they do not change the stated payload limit.

Alternatives to SMALLRIG Phone Holder

One relevant alternative is included for comparison; choose according to your phone’s fit and preferred mounting approach.

Cell Phone Camera Mounts alternative

SMALLRIG 5156 Magnetic Metal Phone Mount
4.6/5

700+ ratings

Read Amazon Reviews

SMALLRIG 5156 Magnetic Metal Phone Mount

Choose the 4382 when you want a clamp that grips phones by width, including devices outside the alternative’s stated MagSafe iPhone fit.

Consider the 5156 if you use a compatible MagSafe iPhone and value its detachable top plate; its description cautions that external impacts may cause the device to detach.

  • The 5156 is a magnetic mount designed for iPhone models with MagSafe functionality.
  • It also supports portrait and landscape switching, has two rotating shafts, a bottom 1/4"-20 threaded hole or cold shoe, and multiple threaded holes.
  • Its top round plate can be detached for use as a mounting plate, and its stated load capacity is 500 g.
  • The 4382 uses a phone clamp with a stated width range of 57–88 mm and two rotary joints for angle adjustment.

Is SMALLRIG Phone Holder Worth It?

The SMALLRIG 4382 is worth considering for phone creators who want flexible framing and accessory mounting in a compact holder.

Its wide phone-width range, dual orientation support, adjustable joints, and multiple attachment points give it a useful role in a modular filming setup.

Check your phone’s width and the complete rig’s weight before buying, and be prepared to supply the camera or tripod support and accessories separately.

If those conditions suit your setup, the 4382 offers a practical combination of clamp fit, angle adjustment, and mounting flexibility.

Your review at a glance

SMALLRIG 4382 Universal Phone Holder Mount
4.6/5

2,000+ ratings

Read Amazon Reviews

SMALLRIG 4382 Universal Phone Holder Mount

A flexible camera or tripod phone clamp for creators who want quick portrait and landscape framing with room for a light or microphone.

  • Fits smartphones measuring 57–88 mm wide.
  • Switches between landscape and portrait orientation, with a secure lock at 90 degrees.
  • Two rotary joints provide up to 180 degrees of adjustment.
  • Attaches through a bottom 1/4"-20 threaded hole or cold shoe.

Written by

yorkscene.com Editorial Team

Editorial team

yorkscene.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SMALLRIG 4382 Universal Phone Holder Mount

SMALLRIG 4382 Universal Phone Holder Mount

A flexible camera or tripod phone clamp for creators who want quick portrait and landscape framing with room for a light or microphone.

  • Fits smartphones measuring 57–88 mm wide.
  • Switches between landscape and portrait orientation, with a secure lock at 90 degrees.
Check Video Reviews on Amazon